CrossLink-NX Object Counting Using VGG Quick Start Guide
Application Note
© 2020 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
FPGA-AN-02024-1.0
9
3.
Run machine training. In the command prompt, execute
./run
command.
Figure 2.6. Execute the Script
4.
Start TensorBoard.
$ tensorboard –logdir=<log directory of training>
For example: tensorboard –logdir=’./logs/’
5.
Open the local host port on your web browser.
Figure 2.7. TensorBoard – Generated Link
6.
Check the training status on TensorBoard.
Figure 2.8. Training Status
