Initial Set-Up
Hydraulic Fluid
Initial Set-Up
9/27/19
3-4
3
3.
Clean or replace if necessary.
4.
Consult the
Engine Operator’s Manual
for the proper procedures and your Parts Manual
for replacement filters.
3.7
Hydraulic Fluid
Keep away from any leaks or loose connections while system is pres-
surized.
Allow ample time for hydraulic fluid to cool before changing or repairing
leaks.
Ensure to use the correct fluid in the hydraulic tank.
Check fluid level and quality daily.
Incorrect fluid, inadequate fluid level, or contaminated fluid will cause
damage to the hydraulic system.
The hydraulic oil used in your Articulator is formu-
lated to prolong the life of the hydrostatic pumps.
Lastec offers the following oil kits (system capacity
is approximately 5 quarts).
1.
Turn the engine off.
2.
Check the hydraulic fluid level and condition.
3.
Ensure the hydraulic oil level remains at the FULL mark at all times.
Do not overfill.
Kit size
Part number
5 gallon
049928
2.5 gallon
049929
1 quart
040642
CM0035-1
FIG. 3-2