Quick Start Guide
Powering on for the first �me:
1. Connect power supply.
2. Red light indicates device is powered on.
3. Device boots within 15 seconds.
Default Log-In Informa�on
Default IP Address
169.254.1.1
Default Username
root
Default Password
password
Note:
The CTM5 controller implements a 'fallback' IP address of 169.254.1.1. This IP address is always available to use to
connect to the device regardless of the con
fig
ura
�
on of the network interface in the GUI. Connec
�
ng this fallback IP address is
the recommended method to use when con
fig
uring the CTM5 Controller for the
fi
rst
�
me.
Con
fig
ure a computer/laptop on the same 169.254.1.0/24 network, use 169.254.1.2 for example.
Connect an Ethernet cable directly from the computer/laptop to the CTM5 -Controller's Ethernet port.
Using a web browser on the computer/laptop, navigate to the CTM5 Controlle r web interface at 169.254.1.1.
Sign in with the username/password listed above.
Changing the Controller's password:
Select the 'System' tab, then the 'Administra
�
on' sub-tab.
Enter new password twice, scroll to b
o�o
m of page and click "Save & Apply" bu
�o
n.
Configuring the network interface IP address:
Select the 'Network' tab. On the 'Interfaces' sub-tab, click the 'Edit' bu
�o
n on the 'Ac
�
ons' sec
�
on on the right.
A new 'LAN' sub-tab will appear, and a separate Con
fig
ura
�
on area.
Note:
The CTM5 Controller ships with its network interface con
fig
ured in DHCP client mode. To change to a sta
�
c IP address,
select 'Sta
�
c Address' from the 'Protocol' drop-down box. Click the 'Switch Protocol' bu
�o
n. Enter appropriate IPv4
informa
�
on and click 'Save & Apply' bu
�o
n when
fin
ished.
CYCLONE CTM5 CONTROLLER
CTM5 CONTROLLER QUICK START GUIDE
2/2019
