LaserPro Spirit GLS Скачать руководство пользователя | Manualshive

Страница: 18 / 62

background image

Page 18

Step 1.

Insert the LaserPro driver CD supplied with your laser cutter and close the auto disc startup feature.

Insert the LaserPro driver GCC CD disc supplied with your laser cutter.

Close the auto disc startup and navigate to the laser drivers folder e.g. GCC Disc\X252\LaserPro Driver\*.EXE

Double click the required file and this will install automatically. When this has fininshed, close the small install window.

Step 2.

Step 1.

Step 2.

Step 3.

Go to the

Start

menu within Windows 7 and select

Devices and Printers

. Then select

Add a Printer

from the top toolbar.

Step 3.

Select add as a

Local Printer

and click

OK.

Step 4.

Select

USB001 (Virtual Printer Port for USB)

from the “use an existing port” drop down menu, then click

Next.

If the

USB 001

option is not available,

remove the USB cable from the computer and re-plug it in and start again from step 2.

Step 5.

Select

Have Disk

, then select

Browse.

Step 6.

Now select your Windows 7 printer driver from your Laser Pro CD and keep on clicking through the menus until you reach the driver , select ‘

Do Not Share

’ and

‘

Do Not Print A Test Page

’

Step 7.

Click

OK

, then Select

Next.

Step 8.

Then select

Next

and then click

OK.

To test that the machine is connected correctly you should go back to the devices and printers section in Windows. You will first see an unspecified device at the

bottom of your screen and you will also see your laser cutter printer driver in the printers section just above this. If you now unplug the USB cable from the computer

the unspecified device will disappear and your laser printer should grey out on the screen (to indicate it has gone offline). If the printer driver has been installed successfully

then when you reconnect the USB cable back into the computer (correct USB port) the unspecified device will reappear and you should see the printer driver become

bold again (come back online).

Installation Complete

Installing Windows 7 Driver (inf file)

Installing Windows 7-10 Executable Driver File

How to Test Your Windows Installation

Installing Windows 7/8 USB driver

Note:

After installation using this method please ensure the port for the printer driver is set to USB001 virtual port.

The laser driver is USB port specific once installed.

Driver Installation For Windows 7-10

«
...
16
17
18
19
20
...
»

Содержание Spirit GLS































































Отзывы:

Нет отзывов

Похожие инструкции для Spirit GLS

Бренд: Parkside Страницы: 115

Бренд: OEM Tools Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды