54
PROGRAMMABLE FUNCTIONS VIA BUTTON/LED
It’s possible programming the principal functions via external button without the connection of the
personal computer.
LED
on for
2 second
OFF
ON
Press
within
2 seconds
USER FUNCTIONS MODIFICATION PROCEDURE
B) FUNCTION PROGRAMMING,
Press another time (12-timed) 2 beeps of the siren for
indicate the 12 function Wait until the LED turns on and according to the table, press for the
number of the time interessed, A short beep indicates the setting change.
Press for
11 times
the button
ON
BEEP
SIREN
Twelfth
pressure
button
2 acoustic signaling
programmable functions
BEEP
BEEP
ON
Wait for
the turn on of the LED
Programmable functions
ON
With the LED on, press for the number
times of the function (Example 2 times
exclusion of the siren beep on disarming)
2 pressure
short beep
(NEW SETTING)
2 pressure
long beeeeep
(DEFAULT SETTINGS)
After the programmation the system exit from the procedure automatically for a new settings
it is necessary to re-enter with the same procedure
PROCEDURE FOR ENTRY TO PROGRAMMABLE SETTINGS
A)
Turn the ignition key to ON and after OFF. The led will turn on for 2 second. Push the button
before the led turn off, for a number of times you desidre, a acustic signalation of the siren
indicate the entrie in programmable settings.
DOOR CONTACT LIGHT BLUE WIRE I TRIGGER
OFF
3
DIRECTION INDICATORS ONLY IN ALARM
4
OFF
READING CAN-BUS SIGNALS IGNITION KEY
ON
5
READING CAN-BUS SIGNALS DOORS CONTACT
6
ON
READING CAN-BUS SIGNALS BONNET CONTACT
ON
7
READING CAN-BUS SIGNALS TRUNK CONTACT
8
ON
RESET DEFAULT SETTINGS
9
OFF
ACOUSTIC SIGNAL ARMING
USER FUNCTION NUMBER
DEFAULT SETTINGS
ON
1
ACOUSTIC SIGNAL DISARMING
2
ON
11
12
SETTINGS AVAILABLE VIA EXTERNAL BUTTON PROCEDURE
11 presses: ALLARM MEMORY OCCURRED
12 presses: USER FUNCTION PROGRAMMING,
13 presses: MEW PIN CODE SELECTION
14 presses: .
15 presses: LEARNING ELECTRONIC KEYS CONTACTS VIA RADIO
example:
