LaserBit Giga Series 4.3 page
25
9.3 Mounting brackets for GigaPRONTOS
The fastening of the
GigaPRONTO
holder frame, is even more critical then the
other brackets. Due to the distance, that can be up to 1 km. We will introduce you
the necessary fixing method however this method can be different depending on the
holder frame type and the surface. Please note that different fixing method must be
used with concrete surfaces and with brick. For the best fits, fastening methods
please contact to your local dealers, or refer to their website. If you have questions
about the fixing, contact
Laserbit
.
There are no two installation sites from the same kind. Sometimes individual design
is required,
Laserbit
provides wide range of Brackets can be found on this CD, feel
free to modify or manufacture them, however the sale of the bracket drawings is
strictly restricted. To help you to design your own brackets Laserbit recommends the
following,
Material:DIN1.0034
Colour: white or light silver with reflective painting. (To reduce the movements
caused by the heat expansion)
The material must be treated for long term use, sometimes in extreme rain, snow,
sun, humidity or sand environments to shield against corrosion.
For the sample we have used a very simple example. The surface is concrete and
the fixing material was Hilti HVU and the screw was Hilti HAS system. The steps are
as follows:
