AO-BT88NC
QUICK USER MANUAL
PRODUCT INCLUDES: 3.5mm audio cable, Micro-USB to USB charging cable, Quick start user manual
INDICATOR LAMP STATUS
STATUS
INDICATOR
Power On
Blue. Slow Double flash.
Charging
Red. On.
Charging Complete
Red. Off.
Pairing
Blue and Red. Flashing.
Pairing Complete
Blue. Slow Flash.
CHARGING THE BATTERY
Connect your AO-BT88NC to any USB charging supply using a Micro-USB cable (supplied).
AUX IN
Your AO-BT88NC will work like normal (unpowered) headphones when connected via AUX IN /
3.5mm audio jack cable (supplied). To conserve battery power, turn your headphones OFF while in
this mode. The controls on your portable device can be used to control playback.
BLUETOOTH AUDIO PLAYBACK
- Press and hold the MULTI-FUNCTION button on your AO-BT88NC (from the OFF position) for
approximately 7 seconds to power the unit ON and to enter pairing mode. The indicator lamp will
begin flashing RED and BLUE. Note: When pairing, the devices should be within 1 meter of each other.
- Using the controls on your Bluetooth device such as a Smart Phone, select the AO-BT88NC in your
Bluetooth settings. If your device requires a password enter the default password 0000 (four zeros).
Note: For further information, refer to the user manual for your specific Bluetooth device for
instructions on pairing and connecting with Bluetooth devices.
LEFT EARCUP CONTROLS
Aux In
RIGHT EARCUP CONTROLS
Micro-USB
Charging Port
Noise Cancelling
Indicator Light
Noise Cancelling
ON/OFF
Microphone
/- Press to adjust volume
Next Previous Press and hold to select track
MULTI-FUNCTION BUTTON
Power /Pair /Play /
Pause/ Speaker Phone.
Press and hold for approx. 7
seconds to power the unit
ON and begin pairing. Press
and hold to power OFF.
Indicator Lamp
