www.lasertools.co.uk
6094
Distributed by The Tool Connection Ltd
Kineton Road, Southam, Warwickshire CV47 0DR
T
+44 (0) 1926 815000
F
+44 (0) 1926 815888
www.toolconnection.co.uk
If this product fails through faulty materials or workmanship, contact our service
department direct on: +44 (0) 1926 818186. Normal wear and tear are excluded
as are consumable items and abuse.
Guarantee
Our products are designed to be used correctly and with care for the purpose for which they are intended. No
liability is accepted by the Tool Connection for incorrect use of any of our products, and the Tool Connection
cannot be held responsible for any damage to personnel, property or equipment when using the tools. Incorrect
use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been designed to offer
general guidance for a particular tool’s use and while all attention is given to the accuracy of the data no
project should be attempted without referring first to the manufacturer’s technical documentation (workshop or
instruction manual) or the use of a recognised authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the right to alter specifications and
components without prior notice. It is the responsibility of the user to ensure the suitability of the tools and
information prior to their use.
Instructions
Welding Helmet
Auto Darkening
User Manual
www.lasertools.co.uk
www.lasertools.co.uk
Warning!
The Solar-Powered Auto-Darkening Welding Helmet is
suitable for most welding applications. This helmet’s
1/25,000-second switch time automatically darkens
the lens the moment you start welding. No matter what
shade the filter is set to, the UV/IR protection is always
present.
PROBLEM(S)
POSSIBLE CAUSE(S)
SUGGESTED SOLUTION(S)
Difficult to see through
filter
Front cover lens dirty
Clean or replace front cover lens
Filter cover lens dirty
Clean filter cover lens
Filter does not darken
when arc is struck
Grind Mode Selected
Adjust Shade from 9 to 13
Sensors or Solar Panel
blocked
Make sure sensors or solar panel are
exposed to weld arc without blocking
Set Sensitivity to LOW
Adjust sensitivity to required level
Filter darkens without arc Set Sensitivity to HIGH
Adjust sensitivity to required level
Filter remains dark
after welding
Set Delay to MAX
Adjust sensitivity to required level
Trouble Shooting
Parts
Part
Description
1
Helmet Shell
2
Shade Control Knob
3
Front Cover Lens
4
ADF
5
Retaining Frame
6
Headgear Angle Adjusting Knobs
7
Headgear Height Adjusting Pin
8
Headgear Diameter Adjusting Knob
Part
Description
1
LCD
2
Delay Control Knob
3
Sensitivity Control Knob
4
Solar Panel
5
Arc Sensors
6
UV/IR Filter
