Laser Technology TruPulse 200L, Руководство пользователя

Страница: 15 / 28

Section 3 - Basic Operations
Page 11
Display Indicator Test
To verify that all display indicators are working properly:
1.
Start with the TruPulse 200L powered OFF, press-and-hold .
2.
Compare the in-scope display to the Figure #6 (page 9) to verify that all indicators
are working properly.
3.
Release to start normal operation.
Error Codes
Error conditions can occur in a measurement or in the system
hardware. To make sure that you never get an erroneous measurement,
the TruPulse 200L monitors both system hardware and measurements.
When the instrument detects an error condition, it displays and error
code instead of a measurement.
Error codes appear in the main display and are in the form of “Exx”,
where “xx” is an error code number. Figure #7 shows an example error
code, E36.

If an error code persists:
1. Release and press again to try to retake the
measurement.
2. Remove and re-install the batteries and then try to retake
the measurement.
3. If the above steps do not resolve the error, contact LTI or
an Authorized LTI Distributor for assistance. Refer to the
inside front cover for LTI contact information.
Figure #7