LTI TruPoint 200h User’s Manual • Section 11 - Specifications
Page 65
Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.
Section 11 - Specifications
All specifications are subject to change without notice. Please refer to LTI's website for current
specifications. If you are not able to locate the information on the website or if you do not have
internet access, please contact LTI. Refer to the inside front cover for LTI contact information.
Dimensions
:
Size: 140 x 85 x 50 mm (5.5 x 3.3 x 2 in)
Weight
:
Weight: 310 g (11 oz) - excluding batteries
Construction
:
Polycarbonate internal chassis with high-quality
Environmental
:
IP67
Temperature
:
-20 to +60º C (-4 to +140º F)
Optics
:
2X Magnification
Display
:
External LCD with Backlight; Internal LED reticle
with 2X magnification
Laser Power
: Pulse
Technology:
1100
µW
Phase Technology:
950 µW maximum
Pulse Beam Divergence
: 3
mrads
Measurement Range
:
Max Distance
:
500 m (1,640 ft) Pulse Technology
100 m (328 ft) Phase Technology
Inclination
:
± 90°
Accuracy
**
:
Distance
:
± 2-5 cm (0.8 - 2 in)
*
Pulse Technology;
± 1.5 mm (0.05 in) Phase Technology
Inclination
:
±0.1° typical, ±30°
***
*
Typical Targets
: Target quality can be affected by atmospheric conditions,
such as heat shimmer, dust, target reflectance, traverse angle to target and
beam spread.
**
Nominal Calibration Distance (Reflective Target) or Angle Tolerance
is 95% level of Confidence under normal test conditions at a temperature of 23°C
and Barometric Pressure of 101kPa.
***
Additional angle related deviation
of ± 0.01° per degree up to ±45° in
each quadrant. Applies at room temperature. For the whole operating temperature
range the maximum deviation increases by ±0.1°.
**Draft B**
