manualshive.com logo in svg

Laser Technology TruPoint 200h, Руководство пользователя

Поделиться
Скачать
Laser Technology TruPoint 200h Скачать руководство пользователя страница 61

LTI TruPoint 200h User’s Manual • Section 7 - Targeting Menu

 Page 59

Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.

Filter

The Filter icon is displayed in the upper right in the main measurement screen when selected.

The Filter icon 

 is displayed in the upper right in the main measurement screen and in 

the HUD 

 when selected. In this mode, the laser's sensitivity is reduced to only detect pulses 

returned from a reflector. This means that the TruPoint will reject pulses from a non-reflective target.

1.

Short press the 

 button. Use the 

 and 

 buttons to the to highlight the Filter icon 

. 

2.

Press the 

 button to turn on the Filter Mode and return to the Measurement screen.

 

Continuous

The Continuous icon 

 is displayed in the upper right in the main measurement screen and in 

the HUD 

 when selected. 

1.

Short press the 

 button. Use the 

 and 

 buttons to the to highlight the 

Continuous icon 

. Press-and-hold the 

 button and once the target is acquired, the 

TruPoint can continuously acquire additional targets for a maximum of 10 seconds. Upon 

releasing the 

 button, the most recently acquired target appears in the Main/HUD Display.

The multi measurement indicator is not displayed in this mode.

**Draft B**

Содержание TruPoint 200h





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды