LTI TruPoint 200h User’s Manual • Section 7 - Targeting Menu
Page 55
Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.
Section 7 - Targeting Menu
The TruPoint 200h has six target modes which allow you to select or eliminate targets and to take the
most accurate measurements possible in various field conditions.
1.
Short press the
button and use the
and
buttons to highlight the target mode to
be set. The name of the targeting mode will be displayed in the lower message area.
2.
Press the
button to activate the desired targeting mode. The icon will be highlighted and
once selected it will go back to the basic Measurement screen and have Targeting mode
icon in upper right segment.
3.
To change the Targeting mode, repeat step 1.
4.
To cancel the Targeting mode:
•
Short press the
button
•
Press the Right Soft Key “OFF” to cancel any targeting mode and the Standard single shot
mode will be active.
•
Press the Left Soft Key (back arrow) to return to the Main Measurement
screen to keep the selected targeting mode.
Target
Mode
Main
Display
HUD
Explanation
Closest
or
The distance to the closest target
displays.
Farthest
or
The distance to the farthest target
displays.
Range Gate
N/A
Restricts the TruPoint 200h to
targeting objects within specified
ranges.
Filter
The laser's sensitivity is reduced so
it only detects pulses returned from
a reflector.
Continuous
Continuously acquire additional
targets for a maximum of 10 seconds.
Timer
N/A
Set a timer to delay a measurement.
**Draft B**
