LTI TruPoint 200h User’s Manual • Section 5 - Function Menu
Page 51
Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.
Addition/Subtraction Routine
Add multiple shots together or subtract a negative space from a measurement. This function can be
used in horizontal measurement, Height, 2D Missing Line, Area and Volume.
1.
Short press the
button and use the
and
buttons to highlight the
Addition/Subtraction Icon
. Press the
button to activate and enter the
function to add or subtract a measurement.
•
To exit the Addition/Subtraction function, short press the
button and
use the navigation buttons to highlight the Addition/Subtraction icon
,
Press the
button to deactivate the function.
To Add/Subtract a Measurement
1.
Enter the Add/Subtract Function menu.
2.
SELECT is displayed in the lower message area, prompting you to use the arrow keys to
select the measurement type for Addition/Subtraction: , ,
or .
3.
Use the
and
buttons to move the arrow
to the measurement that
you want to Add/Subtract.
4.
Select your target and press the
button, the laser pointer is active and laser indicator
pointer is on.
5.
Press-and-hold the
button, the laser will remain active for a maximum of 10 seconds
while acquiring data about the target. The measurements appear in the main display once the
target is acquired
6.
Press the Right Soft Key “=” sign to enter the ADD/SUB menu screens.
•
Press the Left Soft Key to change the icon from Add to Subtract depending
on the desired routine.
7.
To ADD/Subtract either press the:
•
Press the
button to return to a measurement screen and press the
button
to take a measurement.
•
Press the Right soft key equal sign to see the two measurements added/subtracted result.
8.
Continue routine to add/subtract more measurements.
**Draft B**
