manualshive.com logo in svg

Laser Technology TruPoint 200h, Руководство пользователя

Поделиться
Скачать
Laser Technology TruPoint 200h Скачать руководство пользователя страница 52

LTI TruPoint 200h User’s Manual • Section 5 - Function Menu

 Page 50

Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.

HUD Routine

1.

Select your target and look through the eyepiece, using the crosshair to aim to your target. 

The Volume icon 

,SD icon 

, Shot 1 will appear in the display. The SD icon 

 is 

flashing which is prompting you to measure the Slope Distance to the “face” of the target.

2.

Press-and-hold the 

 button. The laser indicator 

 is displayed while the laser is active. 

The laser will remain active for a maximum of 10 seconds while acquiring data about the target. 
The measured slope distance appears briefly (2 seconds) in the main display

3.

Select your second target and look through the eyepiece, using the crosshair to aim to the target. 

The Volume 

 icon, SD icon 

, Shot 2 will appear in the display. The SD 

 icon is 

flashing which is prompting you to measure the Slope Distance to the “face” of the target.

4.

Press-and-hold the 

 button. The laser indicator 

 is displayed while the laser is active. 

The laser will remain active for a maximum of 10 seconds while acquiring data about 
the target. The measured Slope distance appears briefly (2 seconds) in the main display.

5.

Select your second target and look through the eyepiece, using the crosshair to aim to the target. 

The Volume icon 

, SD icon 

, and Shot 3 will appear in the display. The SD 

 

icon is flashing which is prompting you to measure the Slope Distance to the face of the target.

6.

Press-and-hold the 

 button. The laser indicator 

 is displayed while the laser is active. 

The laser will remain active for a maximum of 10 seconds while acquiring data about the target. 
The measured slope distance appears briefly (2 seconds) in the main display.

The Volume icon 

 and the calculated Volume result is displayed.

 Button sequence during the Volume routine:

•

Pressing the back key 

 clears the last measurement 

and allows you to reshoot that measurement. 

•

Pressing the 

 button soft key, exits the Volume Function 

and goes to the main measure screen.

•

Press the 

 button to clear last measurement and to 

re-shoot the previous point.

•

When the Volume result is displayed, just press the 

 button 

to start the routine and repeat the steps.

**Draft B**

Содержание TruPoint 200h





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды