LTI TruPoint 200h User’s Manual • Section 5 - Function Menu
Page 42
Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.
Main Display Routine
1.
Select your target and press the
button, the laser pointer is active.
2.
Shot 1 is displayed in lower message area prompting you to measure the
Horizontal Distance
to the face of the target.
3.
Aim the TruPoint to the target and press-and-hold the
button to acquire
the measurement to the target:
•
The laser sensor will remain active for a maximum of 10 seconds while
acquiring data about the target.
•
The measured Horizontal Distance
value appears in the main display.
4.
Shot 2 is displayed in lower message area and the first INC icon
has dashes
indicating to take first angle measurement to the target base (or top).
5.
Press-and-hold the
button and aim to the base (or top) of the target. The measured
inclination appears in the main display and is updated as long as us you continue to hold
the
button.
The
measured
inclination is locked when you release the
button.
The measured inclination appears in the main display along with the Horizontal Distance
measurement.
6.
Shot 3 is displayed in lower message area and the second INC icon
has dashes indicating
to take second angle measurement to the target top (or base).
7.
Press-and-hold the
button and aim to the top (or base) of the target. The measured
inclination appears in the main display and is updated as long as you continue to hold
the
button.
The
measured
inclination is locked when you release the
button.
The measured inclination appears in the main display.
8.
The Horizontal Distance and the two inclination values are displayed in data area.
The calculated height measurement results are displayed. RESULT is in the lower
message area indicating the height has been calculated.
**Draft B**
