Laser Technology LTI 20/20 TruSpeed Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 46

Laser Technology LTI 20/20 TruSpeed Скачать руководство пользователя страница 34

Page 32 - Laser Technology, Inc. LTI 20/20 TruSpeed Metric User’s Manual 3rd Edition

Copyright (c)[2013] Laser Technology, Inc. All rights reserved. Unauthorized duplication, in whole or in part, is strictly prohibited

Instrument Self Test

Just like when the instrument is powered ON, during

the Self Test the microcontroller interrogates the

system electronics.

To complete the Self Test:

1. Press the

button repeatedly until the

screen display looks similar to Figure #28.

2. Press the TRIGGER to complete the Self

Test. Figure #29 shows an example of all

tests proving positive.



If all tests do not prove positive, the
appropriate error code will appear in

the upper display

.



If the instrument fails the Self Test:

1. Press the

button to power OFF the TruSpeed.

2. Press the

button to once again power ON the

TruSpeed and repeat the Self Test.

3. Contact LTI if the error repeats and you need assistance.

See the inside front cover for LTI contact information.

Figure #28

Figure #29

«
...
32
33
34
35
36
...
»

Содержание LTI 20/20 TruSpeed















































Отзывы:

Нет отзывов