WALLY AC EV Charging Station User Manual
DOC ID: UM210801.A0 18
5.4.
Installation Steps
5.4.1.
Step 1: Install the attachment
As the below figure, drill 4 mounting holes of 10mm diameter and 50mm depth at the appropriate
height, spaced 130mm×70mm apart, and secure the mounting accessories to the wall with the expansion
screw which contain in package.
Fig. 5-2 Install the attachment
5.4.2.
Step 2: Wiring
a)
Secure mounting Accessories(
④
) to the Charging station
；
b)
Remove the cover of Input Terminal Box(
①
);
c)
Pass the input cable through the Input Cable Interface (
②
), connect the power cable to the
Input Terminal (
⑤
);
d)
Reset the cover of input terminal box(
①
).
①
: Input Terminal Box;
②
: Input Cable Interface;
③
: Charging adapter interface;
④
: Accessories;
⑤
: Input Terminal (L1/ L2/L3/N/PE/RJ-45);
⑥
: MCB(if any).
Fig. 5-3 Wiring
