www.filesthrutheair.com/wireless-alert
FilesThruTheAir™ is a trademark of Corintech Ltd.
Issue 1 04/11/2019 Page 1 of 3
Setup Guide
A simple guide to help you set up Wireless Alert with ease.
So you’ve purchased your Wireless Alert product… What now?
The first thing you need to do is download the Wireless Alert app, available on
Google Play and the App Store. The Wireless Alert app includes step-by-step
instructions to walk you through the following:
1. Remove the battery isolation tab
Gently pull the battery isolation tab from the Wireless Alert body.
2. Position your Wireless Alert
Position the Wireless Alert so that it has a strong Wi-Fi signal, this will ensure
that email alerts are as reliable as possible. Unravel the temperature probe (if
necessary) and place the end of the probe in your intended environment. It is
important to ensure that the temperature probe is in an optimal position to
effectively measure any temperature changes for your specific application.
3. Connecting to the Wireless Alert
Following the guidance in the Wireless Alert app, you will connect to the Wireless
Alert device as if it were a Wi-Fi network. You will only need to stay connected to
the device for a few minutes throughout setup. As soon as this is complete your
mobile device will automatically lose connection to the Wireless Alert device and
you will be able to reconnect to your previous Wi-Fi network (this will normally
happen automatically).
4. Naming your device
Enter a suitable device name into the text bar provided in the Wireless Alert
app. Make sure this is something obvious yet unique. We highly recommend that
you also write the device name on the front label of the Wireless Alert. This will
ensure that, if multiple devices are in use, you can easily identify which device has
triggered any alerts.
