GOLIGHT REMOTE OPERATION
A.
The power button power’s the light on your Golight on/off. The Golight will continue to pan and
tilt with power supplied regardless of this setting.
B.
The up, down, left and right arrows on the wireless remote control will move the Golight in the
corresponding direction. The Golight will rotate as long as power is supplied.
C.
The tortoise/hare button sets the pan/tilt speed. Press it once for slower precise movement;
press it again for quick movement.
BATTERY INSTALLATION AND REMOVAL FOR TRANSMITTER
•
Remove battery cover: For wireless hand-held transmitter, remove Phillips head screw
to remove cover. For wireless dash mount remote, simply remove the exterior rubber
cover.
•
With battery compartment now exposed, gently remove old batteries by grabbing the
positive end and lifting up. Insert
2 X GP 23A 12V
batteries according to the correct
polarity.
