![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672091.webp)
91
NOTE!
When drawing a detection area, you can use up to 6 points to
specify the area. Up to 4 detection areas area allowed.
4.
Set sensitivity and time threshold:
Sensitivity
: The higher the sensitivity, the more likely
an object will be detected.
Time Threshold
: An alarm will be triggered when the
length of time an object is missing in specified areas
exceeds this value.
5.
Click
right to
Trigger Actions
and set action(s) to trigger.
For more details, see
6.
(Optional) Click
right to
Arming Schedule
and then set
the time when actions will be triggered.
7.
Click
Apply
to save the settings.
VCA Search
VCA means Video Content Analysis. VCA search searches VCA data
including behavior, human face, and people counting. Only certain
NVR models support this function. You need to select
Save VCA
Images
under
VCA > VCA Config > Basic
before using behavior
search and face search functions.
Face Search
Use face search to search for recordings triggered by detected
faces.
1.
Click
VCA > VCA Search > Face.
2.
Select cameras, set a search period, and then click
Search
.
Search results are displayed.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...