78
5.
Click
right to
Trigger Actions
and set action(s) to trigger.
For more details, see
6.
(Optional) Click
right to
Arming Schedule
and then set
the time when actions will be triggered.
7.
Click
Apply
to save the settings.
Video Loss
A video loss alarm occurs when the NVR loses video signals from
a camera. Video loss alarm is enabled by default.
1.
Click
Alarm > Video Loss
. To disable video loss alarm for a
channel, click , which then changes to .
2.
Click
under
Trigger Actions
and set action(s) to trigger.
For more details, see
NOTE!
Video loss alarm cannot trigger recording, preset, preview (live
view) and snapshot actions for the current camera.
3.
Click
under
Arming Schedule
and then set the time
when actions will be triggered.
4.
(Optional) Click
Copy
to apply the same settings to other
cameras.
Alert
The NVR reports an alert when an event occurs in the system. The
following are some alerts and their definitions in the system.
Running Out of Space:
Less than 10% of disk space remains.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...