![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672076.webp)
76
NOTE!
The number of cameras
that can be connected may vary with
NVR model.
Actions that can be triggered may vary with alarm type.
5.
(Optional) Click
right to
Arming Schedule
and then set
the time when actions will be triggered.
NOTE!
The default schedule is 24×7. You may change it as needed
and set up to eight different periods for each day. Time
periods cannot overlap.
To apply the same arming schedule to other days, select the
intended days and then click
Copy To
.
6.
Click
Apply
to save the settings.
7.
(Optional) Click
Copy
to apply the same settings to other
cameras.
Tampering Detection
A tampering detection alarm occurs when the camera lens is
covered.
1.
Click
Alarm > Tampering.
2.
Select the desired camera and then select
Enable
to enable
tampering detection.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...