![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672075.webp)
75
NOTE!
To apply the same settings to other cameras, click
Copy
, select
cameras, and then click
OK
.
Motion Detection
When enabled, a motion detection alarm occurs if an object
inside the detection area moves to certain extent, and an alarm
icon appears in the upper right corner.
Motion detection is enabled on the NVR by default. Unless
modified, the detection area covers the full screen, and recording
is triggered only for the current camera. The settings remain if you
disable motion detection and then enable it.
1.
Click
Alarm > Motion.
2.
Select the desired camera and then select
Enable
to enable
motion detection.
3.
Use the mouse to draw a detection area, and drag the slider
to set detection sensitivity, target object size, and duration.
The higher the sensitivity, the more likely a moving object
will be detected.
4.
Click
right to
Trigger Actions
and set action(s) to trigger.
For more details, see
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...