![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672017.webp)
17
2
Initial Configuration
Preparation
Make sure that at least one monitor is correctly connected
to the VGA or HDMI interface on the rear panel of the NVR.
Verify that the hard disk(s) are correctly installed. For
detailed steps to install a hard disk, please refer to the quick
guide shipped with your NVR.
Device Login
The login page appears after the NVR starts up.
1.
Enter the default
admin
password
123456
, click
Login
, and
then click
Yes
to change the password.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...