background image

LEDWP-600E-SSB-1227-56K

Larson Electronics, LLC

 

  Phone: (800) 369-6671 

 Fax: (903) 498-3364 

  www.larsonelectronics.com 

1

 of 

2

 

60W Low Profile LED Wall Pack Light w/ Glare Shield

 

Flood Beam - Stainless Steel U-Bracket Mount

Instruction Manual

Thank you for your purchase of the Larson Electronics 

LEDWP-600E-SSB-1227-56K

 Light. Please follow 

the steps below in order to install, operate and maintain this product. 

MOUNTING 

Mounting hardware for the LEDWP-600E-SSB consists of a stainless steel mounting trunnion 

bracket and stainless steel screws to provide secure mounting and resistance to rust and corrosion. 

The mounting assembly provides for 360/180 degrees of rotation and tilt to allow the user to position 

the unit as desired once mounted. 

WIRING 

We strongly encourage a licensed electrician install this product, especially in outdoor locations where 
weatherproofing may be required. Universal voltage driver permits operation at 

100V - 277V AC, 50 or 60Hz

Warning: Check product label for correct input voltage!

 

Attach supply line wires to the appropriate light 
fixture wires as shown in the diagram 

 

Secure each pair with a wire nut according to the 
diagram. Utilize a junction box or similar device and 
take precautionary steps for weatherproofing all 
connections if installed in a location where water may 
come in contact with the unit. Ensure the unit is 
properly grounded. 

IMPORTANT

 

READ CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE 
REFERENCE.  THE 

LEDWP-600E-SSB-1227-56K

  MUST  BE  WIRED  IN  ACCORDANCE  WITH  NATIONAL 

ELECTRICAL CODE AND ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS REQUIRED FOR SAFETY.  

WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, OPERATE AND MAINTAIN THIS 
PRODUCT. IF YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET, 
CONSULT AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE. 

RISK OF FIRE/ELECTRIC SHOCK –

 

DISCONNECT POWER AT BREAKER BEFORE INSTALLING OR SERVICING.

 

RISK OF PERSONAL INJURY –

 

FIXTURE MAY BECOME UNSTABLE OR DAMAGED IF NOT INSTALLED PROPERLY. 

RISK OF BURN –

 

ALLOW FIXTURE TO COOL BEFORE SERVICING.

 

WARNING:

 

MAKE SURE POWER IS TURNED 

OFF

 BEFORE STARTING THE 

INSTALLATION OR PERFORMING ANY MAINTENANCE.

 

 

 

The LEDWP-600E-SSB from Larson Electronics is a LED Wall Pack Light w/ Stainless Steel 

Mounting Bracket that offers high light output from a compact form factor and is designed to provide 

a more durable and long lived alternative to halogen and metal halide units. This 60 watt LED light 

produces a wide flood beam without the high heat, fragile construction, or high energy costs of 

incandescent lighting.

Отзывы: