Larson Electronics ATEX-EXPCMR-IP-POE-2MPIR-108D, Быстрое руководство по установке

Страница: 145 / 169

140
Explosion Proof Network IP Camera User Manual
Chapter 9 Road Traffic
Purpose:
Vehicle Detection and Mixed-traffic Detection are available for the road traffic
monitoring. In Vehicle Detection, the passed vehicle can be detected and the picture of
its license plate can be captured; besides, the vehicle color, vehicle logo and other
information can be recognized automatically. In Mixed-traffic Detection, the
pedestrian, motor vehicle and non-motor vehicle can be detected, and the picture of
the object (for pedestrian / non-motor vehicle / motor vehicle without license plate) or
license plate (for motor vehicle with license plate) can be captured. You can send
alarm signal to notify the surveillance center and upload the captured picture to FTP
server.
Note: Road traffic function varies according to different camera models.
Steps:

Configuring the Detection Settings
1. Select the detection type from the list. Vehicle Detection and Mixed-traffic
Detection are selectable.
Note: Reboot the device to activate the new settings when switching the detection
type of road traffic.
2. Check the checkbox of Enable the enable the selected detection function.
3. Select the lane number in the corresponding dropdown list. Up to 4 lanes are
selectable.
4. Click and drag the lane line to set its position, or click and drag the line end to
adjust the length and angle of the line.
5.
Adjust the zoom ratio of the camera so that the size of the vehicle in the image is
close to that of the red frame. Only the position of red frame is adjustable.
Note: Only 1 license plate can be captured at one time for each lane.
6. Select a Province/State Abbreviation in the drop down list when the attribution of
license plate cannot be recognized.
7. Set the Arming Schedule for Vehicle Detection.