manualshive.com logo in svg

Larson Davis System 824, Техническое справочное руководство, Страница: 285 / 673

Поделиться
Скачать
Larson Davis System 824 Скачать руководство пользователя страница 285

9/29/09

Printing a Report

8-1

C H A P T E R

8

Printing a Report

The System 824 allows you to print a report from data col-
lected during a measurement. This chapter will discuss the
following aspects of printing reports:

• Connecting the 824 to a Serial Printer

• Printing Reports

• Defining and Printing Tailored Reports

• Printing a Custom Report

While most users will normally print 824 data using a com-
puter, it is possible to print both graphical and tabular data
reports directly from the 824 to virtually any serial printer.
Printouts range from high resolution presentation quality
reports when printing to a laser printer because of the instru-
ment’s PDL-3 (page description language) capabilities, to
draft-quality tabular data reports that can also be printed to a
dot matrix printer. 

Connecting the 824 to a Serial Printer

Another cable is available for
certain printers that have a 9-pin
female “D” connector (CBL091).

Make sure the System 824 and your printer are turned off
before initiating any of the following steps.

Step 1

Connect the provided (CBL002) serial cable’s 8-
pin mini DIN connector to the System 824 serial 
port.

Step 2

Connect the serial cable’s 25-pin male “D” con-
nector to your printer’s serial port.

If your printer does not have either of
these connectors, it is likely not a
serial printer. Do not attempt to con-
nect the 824 as damage may result.

Содержание System 824


































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов