Spartan 730/730IS Dosimeter Manual
Setting a Measurement Timer
46
Step 9.
From the Timers menu, highlight, then select
Timer 1 Start
. This opens
the Start Time screen.
Step 10.
Set the time the measurement should start in hh:mm:ss format. This
returns you to the Timers menu.
Using the Dosimeter Buttons to Set the Start Time
•
Press the
up
or
down
button to change the digit.
•
Press
select
to set the digit and progress to the right.
•
Set all digits to exit the Start Time screen.
•
Quick press
POWER
to step back to the left at any time.
Step 11.
From the Timers menu, highlight, then
select
Timer 1 Stop
. This opens
the Timer 1 Stop screen.
Step 12.
Set the time the measurement should stop in hh:mm:ss format. This
returns you to the Timers menu.
Step 13.
If you want to set up additional timers, do the following:
Setting Timer 2
a.
From the Timers menu, highlight, then
select
Timer 2 Enable
, or
Timer
3 Enable
.
b.
Use
up
or
down
, and
select
to choose
Enabled
and return to the Timers
menu.
c.
Repeat steps 9–12 to set the
Start Time
and
Stop Time
for this timer.
d.
To enable Timer 3, repeat this Setting Timer 2 section.
3.4.3 Disabling a Measurement Timer
Before you begin:
•
Power on the dosimeter.
•
Stop any measurement in progress.
Repeat the process shown in step 10.
In this section, use
UP
or
DOWN
on the dosimeter to
highlight an option. Use
SELECT
to set the option. Quick
press
power
to step up one level in a menu.
