Larson Davis Spartan 730 Скачать руководство пользователя страница 100

Страница: 100 / 101

Spartan 730/730IS Dosimeter Manual

D-4

C.3 Intrinsic Safety Ratings and Information

Special Conditions for Safe Use

quipment has been assessed for connection to Um: 5.5VDC. This voltage

shall be maintained in accordance with the guidance given with IEC 60079-14.

Other Safety Information

•

Charge ONLY outside hazardous areas using the appropriate charger

other equipment approved by Larson Davis.

•

Charge the device at temperatures between 10

C and 40

C in indoor

conditions.

•

Do not attempt to physically connect the device to other equipment

within ex-hazardous areas.

•

Do not expose the device to acid or alkaline substances, or solvent-based

cleaner.

•

Calibrate the microphone outside ex-hazardous areas only.

•

Do not replace the battery yourself or attempt to install a lithium battery.

Without exception, contact Larson Davis for authorized battery

replacement.

•

Only use accessories approved by Larson Davis with this device.

Applicable Standards

I.S Ratings/Markings

Serial Numbers

IEC 60079-0: Edition 7; EN 60079-0:2018
IEC 60079-11: Edition 6; EN 60079-11:2012
UL 913: Edition 8
UL 60079-0: Edition 7
UL 60079-11: Edition 11
CSA C22.2 No. 60079-0: 19;

CSA C22.2 No. 60079-11: 14

UL 61010-1: Edition 3 + R:29Apr2016 CAN/CSA C22.2 No. 61010-1-2012 + U1

ATEX/IECEx

II 1G Ex ia IIC T165 ºC Ga
I 1M Ex ia I Ma
IECEx ETL 19.0045X ITS20ATEX205538X
-10 ºC ≤ TAMB ≤ +50 ºC

CAN/USA

Class I, Zone 0, AEx ia IIC T165 ºC Ga
Class I, Division 1, Groups A, B, C & D, T165 ºC
-10 ºC ≤ TAMB ≤ +50 ºC

For each serial number YYXXXX, YY is the 2 digit year of manufacture,

and the XXXX is the device sequence number.

I730.01-IS-SD (A) Do not change drawing without approval from the notified body and MSHA.

Any changes could result in an unsafe condition.

Содержание Spartan 730






































































































Результаты поиска

Содержание Spartan 730

Отзывы:

Бренды по названию

Популярные бренды

Larson Davis Spartan 730, Справочное руководство

Результаты поиска

Содержание Spartan 730

Отзывы:

Бренды по названию

Популярные бренды