Larson Davis 831C-FFT, Справочное руководство, Страница: 67 / 254

SoundAdvisor Model 831C Creating a Custom Setup File On the Meter 62
FIGURE 6-12
Setup Manager: Weather With Time History
1.
On the Time History tab scroll down in the Options
section to select from the following, selectable
measurement options:
• Wind Speed, Wind Direction, Gust Speed, Gust Direction
• Temp Average, Temp Max, Temp Min
• Pressure Average, Pressure Max, Pressure Min
• Rain Max Intensity, Rain Accumulation, Rain Duration
• Hail Max Intensity, Hail Accumulation, Hail Duration
LEARN MORE
For complete details on the Time History tab,
see Module 16 Using Time History .
6.2.3 Saving the Setup File
Before you begin:
• Complete 6.2.1 Creating a New Setup File On the Meter
• Complete 6.2.2 Customizing Setup Values On the Setup Manager Tabs
Step 1.
To save your Setup and exit the Setup Manager, select
Close
(
/*/
).
Step 2.
In the Save dialog, choose Yes to save your settings.
Step 3.
Highlight and press
Enter
5
on the name of the Setup you created.
Step 4.
In the pop-up menu that appears, Set to Active is highlighted. Press Enter
5
to select that option. The next measurement runs using the Setup you just
created.
TAKE NOTE
You can also complete the setup process in G4 LD Utility, which provides a
simple, file transfer-style interface for configuring, saving, and transferring
Setup files to your PC or to another meter. For more information, refer to the
G4 LD Utility Reference Manual .
6.2.4 Choosing a Run Mode
Before you begin:
• Complete steps 1–7 of section 6.2 Creating a Custom Setup File On the Meter .
On the Control tab, there are 6 Run Modes available. Your choice determines which other
settings and features are available. Click on a link below to learn about a run mode.
1.