Lapple FIBRO FIBROTOR EM.NC Series, Руководство по сборке и эксплуатации

Страница: 24 / 60

3 TECHNICAL DESCRIPTION
3.7 ADDITIONAL COMPONENT ASSEMBLIES AND ACCESSORIES
FIBROTOR
24 | 60
_________________________________________________________________
_________________________________________________________________
Fig. 6 Hydraulic table top clamping
The clamping should never be activated
during the rotation motion of the table top (also not at emergency stop!). The
rotary table should never start against closed clamping. This leads to
damages. When the clamping is activated, the table top and the housing are
connected to each other in a friction-locked manner. The max. clamping
pressure and the max. operating pressure should not be exceeded. At higher
pressures, the clamping elements can be damaged. The activation of the
tangential forces may take place only within the limits defined by the
technical specification. If the tangential moments at the clamped table top are
exceeded, the clamping elements and, possibly, the driving elements are
destroyed.
3.7.2
Connection diagram table top clamping

Pressure switch, setting range 2-20 bar, Ident. No.: - No.: 070 572 3

Pressure switch, setting range 10-100 bar, Ident. No.: - No.: 075 704 7

Pneumatic hydraulic tensioning unit, type MO 12
Ident. - No.: 075 766 6