44428235
Assembly instruction
Valid from
28.07.2021
EPIC
®
SOLAR 4PLUS
Document: L44428235EN
Version: 03
Page 7 of 8
We reserve all rights according to DIN ISO 16016.
Mounting
Insert the crimped contact into the opened cable gland until the contact clicks into place.
Lightly pull the cable to make sure that the contact is properly engaged.
Turn cap nut “hand-tight” (4,5 Nm) – finished. Spanner size 19.
(EPIC
®
SOLAR 4PLUS F)
Connecting and Disconnecting
Before plugging in, check the plugging area for possible soiling and clean it if necessary.
Especially the O-ring on the female connector must be absolutely clean. Trapped moisture
must be removed. Plug EPIC
®
SOLAR 4PLUS, male and female together until the snap-in hooks
are fully engaged on both sides.
To disconnect, press the latching hooks on both sides with the standard pliers (article
3115160) and pull them apart carefully but firmly.
