LAPIS Semiconductor ML62Q1722, Руководство пользователя

Страница: 14 / 16

ML62Q1722 Reference Board User’s Manual
FEBL62Q1722RB 10
5.2. ML62Q1722 Reference Board BOM
Table 3
Reference Board BOM
Parts Number Silk Contents Package Type Qty. Maker
1 QTU-11859 RB-D62Q1722GA64 PWB - 1 LAPIS
2 C1608X7R1E105K C1, C2, C5, C6,
C7, C8 Ceramic
Capacitor
1uF/35V 1608(1.6x0.8mm) 6 TDK
3 GRM1885C1H220J C3, C4 Ceramic
Capacitor
22pF/50V 1608(1.6x0.8mm) 2 MURATA
4 HIF3FC-14PA-2.54DSA(71) CNE 14pin Header
Connector 14PIN DIP 1 HIROSE
5 A2-3PA-2.54DSA J1, J2, PWR 3pin Header
Connector 3PIN DIP 3 HIROSE
6 MCR03ERTJ000 J3, J4, J5
Resistor 0Ω
1608(1.6x0.8mm) 3 ROHM
7 SML-H12P8T P20, P21, P22 LED Green 2012(2.0x1.2mm) 3 ROHM
8 MCR03EZPJ271 R1, R2, R3
Resistor 270Ω
1608(1.6x0.8mm) 3 ROHM
9 MCR01MZPJ103 R4
Resistor 10kΩ
1005(1.0x0.5mm) 1 ROHM
10 ML62Q1722-NNNGA U1 16-bit
Microcontroller QFP64 1 LAPIS
11 VT-200-F 12.5pF X1 X'tal 32.768kHz
12.5pF 2PIN 1 SII
12 HIF3GA-2.54SP - Short pin - 3 HIROSE
13 FF013-P3555-AR791 - Rubber leg, Push
rivet - 4 KOYO
FASTENER
14 - CN1, CN2 Unmounted 50PIN DIP 2 -
15 - J6, J7, J8, J9,
J10, J11, J12 Unmounted 1608(1.6x0.8mm) 7
16 - VDD, VSS, UVDD Unmounted
φ0.8mm
3
[Note]
-
The diameter of through hole of CN1 and CN2 is 0.8 mm.
Using CN1 and CN2, the diameter of connector pin should use the connector below 0.8mm, such as 0.5mm.
-
The parts may be changed into another parts with equivalent part special quality.
5.3. ML62Q1722 Reference Board Schematic
The next page shows the schematic of ML62Q1722 Reference Board