![LANZINI TM Скачать руководство пользователя страница 1](http://html1.mh-extra.com/html/lanzini/tm/tm_instructions_3614188001.webp)
P06113000
www.lanzini.it
MODEL
EP s.p.a. Via del Commercio 1 - 25039 - Travagliato (BS) - ITALY
TM
EN
INSTRUCTIONS
INSTALLATION, USE AND MAINTENANCE
-
Warning!
Security of the fitting is guaranteed only with the appropriate use of the
following instructions: therefore it is necessary to preserve them.
-
Warning!
Before connecting to the main network, during assembly or
replacement of the product, make sure to disconnect the tension.
-
Warning!
This lighting fitting’s flexible cable cannot be replaced. If the the cable is
damaged, the luminaire must be changed.
-
Warning!
The product has to be repaired only by professional technicians or by the
manufacturer.
- During the installation of the system scrupulously respect the current plant
standards. Scrupulously follow the polarity of the wires: phase-brown / neutral-blue
/ eart-yellow/green. The disregard of this requirement could generate small
functional defects. For outdoor installation we recommend the use of a two-pole
switch.
- The fitting should be used only if complete with its protection screen.
TM:
It’s a
polycarbonate lens.
- For any replacement contact the manufacturing company.
- The fitting must be installed by a professional electrician.
- The fitting cannot be modified or tampered with in any way, any modification may
compromise security by making it dangerous. The manufacturer declines any
responsibility for the modified products.
- Class I fitting must be connected to the ground circuit of the electrical plant.
- Keep at least 1 m between the fitting and the illuminated surface.
- Fitting suitable for indoor and outdoor applications. Protection degree IP65.
- Fitting suitable for direct mounting on normally inflammable surfaces
- For use in environments where an accumulation of non-conductive dust on the
luminaire
-
Warning!
Risk of electric shock
Power supply:
220-240V Ac 50/60 Hz
Power
Weight
Dimensions Surface exposed to the wind
Operating temperature:
-40° +45°C
Insulation class:
I
1 m
FR
INSTRUCTION
IINSTALLATION, USE AND MAINTENANCE
-
Attention!
La sécurité du projecteur est garantie uniquement avec l'utilisation
appropriée des instructions suivantes: vous devez donc les conserver.
-
Attention!
Avant de faire des connexions réseau, pendant l'assemblage ou le
remplacement du produit, assurez-vous que la tension a été supprimée.
-
Attention!
Le câble flexible de cet appareil ne peut pas être remplacé. Si le câble
est endommagé l'appareil doit être changé.
-
Attention!
L'appareil ne peut être réparé que par du personnel spécialisé ou par le
fabricant.
- Lors de l'installation du système, respectez scrupuleusement les normes en
vigueur. Suivez scrupuleusement la polarité des fils: phase-marron / neutre-bleu /
terre-jaune/vert. Le non-respect de cette exigence pourrait générer de petits défauts
de fonctionnement. Pour une installation en extérieur, nous recommandons
l'utilisation d'un interrupteur bipolaire.
- L'appareil doit être utilisé uniquement s'il est complet avec son écran de
protection.
TM
: c’est une lens en polycarbonate.
- Pour tout remplacement, contactez le fabricant.
- L'appareil doit être installé par un électricien professionnel.
- L'appareil ne peut être modifié ou altéré de quelque manière que ce soit une
modification peut compromettre la sécurité en le rendant dangereux.
- L’appareil de class I doit être connecté au circuit de terre de l’installation életrique.
- Maintenez au moins 1 m entre l'appareil et la surface éclairée.
- Appareil adapte pour une utilisation en intérieur et extérieur. Degré de protection IP65.
- Appareil adapte au montage direct sur des surfaces normalement inflammables.
- Suivez la procédure illustrée pour une installation correcte.
- Pour une utilisation dans des environnements où une accumulation de poussière
non conductrice peut être attendue
-
Attention!
Risque de chol électrique
Voltage:
220-240V Ac 50/60 Hz
Puissance Poids
Dimensions Surface exposée au vent
Température de functionnement:
-40° +45°C
Classe de protection:
I
1 m
CEILING KIT OPTIONAL
TM - LKITA00000100013
CEILING KIT OPTIONAL
TM - LKITA00000100013
60 W
1 Kg
Ø193×97,3 mm
0,029 m² 0,007 m²
60 W
1 Kg
Ø193×97,3 mm
0,029 m² 0,007 m²
IP66
OUTDOOR
INDOOR
IT
-Questo prodotto contiene una sorgente luminosa di efficienza energetica classe
EN
-This product contains a light source of energy efficiency class
FR
-Ce produit contient une source lumineuse de classe d'efficacité énergétiques
D