5: Configuration Using Web Manager
XPress™ DR Industrial Device Server User Guide
37
At Time of Disconnect
Select
Yes
to clear the input buffer when the network connection to or
from the device is disconnected. The default setting is
No
.
Flush Output Buffer (Network to Serial)
With Active Connect
Select
Yes
to clear the output buffer with a connection that is initiated
from the device to the network. The default setting is
No
.
With Passive Connect
Select
Yes
to clear the output buffer with a connection initiated from the
network to the device. The default setting is
No
.
At Time of Disconnect
Select
Yes
to clear the output buffer when the network connection to or
from the device is disconnected. The default setting is
No
.
6. When you are finished, click the
OK
button.
7. Click
Apply Settings
in the Navigation bar.
Channel 1 – Connection Configuration
Connection Settings - TCP
To configure a channel’s TCP settings:
1. In the Navigation bar, click
Connection
(organized beneath
Channel 1
). The Connection
Settings window for the channel displays.
Figure 5-7 TCP Connection Settings
