xPico
®
200 Certification Firmware Instructions
3
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This device is intended only for OEM Integrators. The OEM integrator should be aware of the
following important considerations.
Revision History
Date
Rev.
Comments
April 2018
A
Preliminary Draft.
August 2018
B
Updates for new MFG Loader
March 2019
C
Updates to the Continuous Mode Software Load instructions.
For the latest revision of this product document, please check our online documentation at
www.lantronix.com/support/documentation
