Lantronix
TN-USB3-xx-01Series User Guide
33644 Rev. E
Page
4
of
27
Product Description
The Lantronix TN-USB3-xx-01 Scorpion-USB
TM
3.0 to Gigabit Ethernet Fiber Adapter allows a PC, laptop,
tablet or other computer equipment without a fiber interface to connect to a fiber network through a USB
3.0 (or 2.0 or 1.1) interface.
The TN-USB3-xx-01 provides protocol conversion from USB to 1000Base-X (100/1000 Base-X for SFP version)
for use with laptops, tablets, and convertibles with USB ports in secure networking environment or where
wireless is not permitted and connectivity to a fiber network is required.
Ordering Information
Model
Description
TN-USB3-SX-01(SC)
USB 3.0 to 1000Base-SX MM SC Ethernet Adapter
TN-USB3-SX-01(LC)
USB 3.0 to 1000Base-SX MM LC Ethernet Adapter
TN-USB3-SFP-01
USB 3.0 to 100/1000Base-X Open SFP Ethernet Adapter
Additional Features
The TN-USB3-xx-01 was designed with these features:
•
USB 3.0 [5Gbit/s (625MB/s)] peripheral device
•
1000Base-X (100/1000 Base-X for SFP version)
•
SFP fiber interface – MSA compliant supporting up to a 1W module
•
Fixed optic versions LC and SC
•
Standard OS support – Windows 7, 8.1, and 10 both 32-bit and 64-bit
•
Standard drivers provided by ASIX on the Lantronix
•
Plastic ABS enclosure with 9” pigtail to USB 3.0 Type-A connector
Related Manuals and Information
A printed documentation card is shipped with each Scorpion-USB adapter. The full User Guide is available
online. For Lantronix Drivers, Firmware, etc. go to the
webpage (registration required).
For Lantronix Manuals, Brochures, Data Sheets, etc. go to the
Note that this manual provides links to third party web sites for which Lantronix is not responsible. Other
related manuals are listed below.
1.
Product Documentation Postcard, 33504
2.
TN-USB3-xx-01 User Guide, 33644 (this manual)
3.
SFP manual (model specific; see Lantronix
Note
: Information in this document is subject to change without notice.
