Lantronix SM24TBT2DPA Скачать руководство пользователя страница 281 | Manualshive

Страница: 281 / 360

Lantronix SM24TBT2DPA Скачать руководство пользователя страница 281

Lantronix

SM24TBT2DPA and SM24TBT2DPB Web User Guide

33738 Rev. H

https://www.lantronix.com/

Page 281 of 376

3-10.1.2 Group Information

After you complete setting the IGMP Snooping function you can have the switch display the IGMP

Snooping Group Information. Entries in the IGMP Group Table are shown on this page. The IGMP Group

Table is sorted first by VLAN ID, and then by group. Clicking the Next entry button will use the last entry of

the currently displayed table as a basis for the next lookup. When the end is reached the text "No more

entries" is shown in the displayed table. Use the Refresh button to start over.
Each page shows up to 99 entries from the IGMP Group table, default being 20, selected through the

"entries per page" input field. When first visited, the web page will show the first 20 entries from the

beginning of the IGMP Group Table.
The "Start from

", and "group" input fields lets you select the starting point in the IGMP Group Table.

Clicking the Refresh button will update the displayed table starting from that or the closest next IGMP

Group Table match. In addition, the two input fields will - upon a Refresh button click - assume the value of

the first displayed entry, allowing for continuous refresh with the same start address.
Clicking the Next entry (

>>

) button will use the last entry of the currently displayed table as a basis for the

next lookup. When the end is reached the text "No more entries" is shown in the displayed table. Use the

<<

button to start over.

Web Interface

To display IGMP Snooping Group Information in the web UI:
1.  Click Monitor, IGMP Snooping, Group Information.
2.  Check the “Auto-refresh” checkbox or click “Refresh” to refresh the page.
3.  Click “<< or > “to move to previous or next entry.

Figure 3-10.1.2: IGMP Snooping Group Information page

Parameter descriptions:
VLAN ID:

VLAN ID of the group.

Groups:

Group address of the group displayed.

Port Members:

Ports under this group.

Buttons

Auto-refresh:

Check this box to refresh the page automatically every 3 seconds.

Refresh

: Click to refresh the page immediately.

<<:

Updates the system log entries

to the first available entry ID.

>:

Updates the system log entry to the next available entry ID.

«
...
279
280
281
282
283
...
»

Содержание SM24TBT2DPA









































































































































































































































































































































































Отзывы:

Нет отзывов