Lantronix SM24TBT2DPA Скачать руководство пользователя страница 241

Страница: 241 / 360

Lantronix

SM24TBT2DPA and SM24TBT2DPB Web User Guide

33738 Rev. H

https://www.lantronix.com/

Page 241 of 376

3-5.2.2 NAS

3-5.2.2.1 Switch

This page displays port NAS status information of the switch. The status includes Admin State, Port State,

Last Source, Last ID, QoS Class, and Port VLAN ID.
To view NAS Switch Status in the web UI:

1.  Click Monitor, Security, Network, NAS, Port.
2.  Check “Auto-refresh”.
3.  Click “Refresh” to refresh the port detailed statistics.

Figure 3-5.2.2.1: Network Access Server Switch Status page

Parameter descriptions:
Port:

The switch port number. Click to navigate to detailed NAS statistics for this port.

Admin State:

The port's current administrative state. See section

2-5.1 Switch

on page

for a

description of possible values.

Port State:

The current state of the port. Refer to NAS Port State for a description of the individual states.

Last Source:

The source MAC address carried in the most recently received EAPOL frame for EAPOL-

based authentication, and the most recently received frame from a new client for MAC-based

authentication.

Last ID:

The user name (supplicant identity) carried in the most recently received Response Identity

EAPOL frame for EAPOL-based authentication, and the source MAC address from the most recently

received frame from a new client for MAC-based authentication.

QoS Class:

QoS Class assigned to the port by the RADIUS server if enabled.

Содержание SM24TBT2DPA









































































































































































































































































































































































Результаты поиска

Содержание SM24TBT2DPA

Отзывы:

Lantronix SM24TBT2DPA, Руководство пользователя для веб, Страница: 241 / 360

Результаты поиска

Содержание SM24TBT2DPA

Отзывы: