Lantronix SM24TBT2DPA Скачать руководство пользователя страница 223 | Manualshive

Страница: 223 / 360

Lantronix SM24TBT2DPA Скачать руководство пользователя страница 223

Lantronix

SM24TBT2DPA and SM24TBT2DPB Web User Guide

33738 Rev. H

https://www.lantronix.com/

Page 223 of 376

3-3.4 Detailed Statistics

This page displays detailed traffic statistics for a specific switch port. The displayed counters are the totals

for receive and transmit, the size counters for receive and transmit, and the error counters for receive and

transmit.
To display per-port detailed Statistics Overview in the web UI:

1.  Click Monitor, Ports, Detailed Statistics.
2.  Use the port select box to select which switch port details to display.
3.  To automatically refresh the information, check the “Auto-refresh” checkbox.
4.  Click “Refresh” to refresh the port detailed statistics or clear all information when you click “Clear”.

Figure 3-3.4: Detailed Port Statistics page

Parameter descriptions:
Receive Total and Transmit Total
Rx and Tx Packets:

The number of received and transmitted (good and bad) packets.

Rx and Tx Octets:

The number of received and transmitted (good and bad) bytes. Includes FCS, but

excludes framing bits.

Rx and Tx Unicast:

The number of received and transmitted (good and bad) unicast packets.

Rx and Tx Multicast:

The number of received and transmitted (good and bad) multicast packets.

Rx and Tx Broadcast:

The number of received and transmitted (good and bad) broadcast packets.

Rx and Tx Pause:

A count of the MAC Control frames received or transmitted on this port that have an

opcode indicating a PAUSE operation.

«
...
221
222
223
224
225
...
»

Содержание SM24TBT2DPA









































































































































































































































































































































































Отзывы:

Нет отзывов