Lantronix SM24TBT2DPA Скачать руководство пользователя страница 163 | Manualshive

Страница: 163 / 360

Lantronix SM24TBT2DPA Скачать руководство пользователя страница 163

Lantronix

SM24TBT2DPA and SM24TBT2DPB Web User Guide

33738 Rev. H

https://www.lantronix.com/

Page 163 of 376

2-16 Private VLANs

In a private VLAN, communication between ports in that private VLAN is not

permitted. A VLAN can be configured as a private VLAN.

2-16.1 Private VLAN Membership Configuration

The Private VLAN Membership Configuration for the switch can be monitored and modified here. Private

VLANs can be added or deleted here. Port members of each Private VLAN can be added or removed

here.
Private VLANs are based on the source port mask, and there are no connections to VLANs. This means

that VLAN IDs and Private VLAN IDs can be identical.
A port must be a member of both a VLAN and a Private VLAN to be able to forward packets. By default, all

ports are VLAN unaware and members of VLAN 1 and Private VLAN 1.
A VLAN unaware port can only be a member of one VLAN, but it can be a member of multiple Private

VLANs.

Web Interface

To configure Private VLAN Membership parameters in the web UI:

1. Click Configuration, Private VLANs, Membership.

2. Select the ports you want to enable VLAN membership.

3. Click Apply.

Figure 2-16.1: Private VLAN Membership Configuration page

Parameter descriptions

:

Delete

: To delete a private VLAN entry, check this box. The entry will be deleted during the next save.

Private

VLAN

ID

: Indicates the ID of this particular private VLAN.

Port

Members

: A row of check boxes for each port is displayed for each private VLAN ID. To include a

port in a Private VLAN, check the box. To remove or exclude the port from the Private VLAN, make sure

the box is unchecked. By default, no ports are members, and all boxes are unchecked.

«
...
161
162
163
164
165
...
»

Содержание SM24TBT2DPA









































































































































































































































































































































































Отзывы:

Нет отзывов