Lantronix
SM24TBT2DPA and SM24TBT2DPB Web User Guide
2-11.2.3 Port Filtering Profile
This page lets you set Port Group Filtering in the MLD Snooping function and add a new filtering group
and safety policy.
Web Interface
To configure MLD Snooping Port Group parameters in the web UI:
1. Click Configuration, IPMC, MLD Snooping, Port Filtering Profile.
2. Click the Add New Filtering Group button.
3. Specify the Filtering Groups with entries per page.
4. Click
Apply
to save the setting.
5. To cancel the settings click the
Reset
button. The page will revert to previously saved values.
Figure 2-11.2.3: MLD Snooping Port Filtering Configuration page
Parameter descriptions:
Port:
The logical port for the settings
.
Filtering Profile:
Select the IPMC Profile as the filtering condition for the specific port. Summary about the
designated profile will be shown by clicking the view (
) button.
Navigate Profile
button
:
You can inspect the rules of the designated profile by using the following button:
:
View the rules associated with the designated profile. The button is greyed out (
) if no profile
name has been assigned.
Buttons:
Apply
– Click to save changes.
Reset -
Click to undo any changes made locally and revert to previously saved values.