Lantronix
SM24TBT2DPA and SM24TBT2DPB Web User Guide
Introduction
Product Description
Lantronix
SM24TBT2DPA
is a high performance Layer 2 managed switch with 52 Gbps switching
capacity. It provides (24) 10/100/1000 copper ports with IEEE 802.3bt PoE++ capability and (2) additional
100/1000 dual speed SFP/RJ-45 Combo ports. The SM24TBTDPA complies with the latest IEEE 802.3bt
PoE++ standard and supplies up to 90 Watts per port. It can provide up to 1560 Watts PoE output when
equipped with dual hot-swappable power supplies.
The Lantronix
SM24TBT2DPB
is a high performance Layer 2 managed switch with 52 Gbps switching
capacity. It provides (24) 10/100/1000 copper ports with IEEE 802.3bt PoE++ capability and (2) additional
100/1000 dual speed SFP/RJ-45 combo ports. The SM24TBT2DPA complies with the latest IEEE
802.3bt PoE++ standard and supplies up to 90 Watts per port. It can provide up to 2160 Watts PoE
output (90W on all 24 ports) with the dual hot-swappable power supplies equipped.
Model differences are noted where they apply.
Overview of this Manual
•
Chapter 1 Operation of Web-based Management
•
Chapter 2 System Configuration
•
Chapter 3 Configuration
•
Chapter 4 Monitor
•
Chapter 5 Maintenance
•
Chapter 6 DMS (Diagnostic Management System)
•
Chapter 7 Troubleshooting
•
Appendix A DHCP Per Port
•
Appendix B Service, Warranty & Tech Support
•
Appendix C Compliance Information
About This Manual
Purpose
: This manual gives specific information on how to use the management functions of the
SM24TBT2DPx.
Audience
: The manual is intended for use by network administrators who are responsible for operating
and maintaining network equipment; consequently, it assumes a basic working knowledge of general
switch functions, the Internet Protocol (IP), and Simple Network Management Protocol (SNMP).
Disclaimer
: Lantronix does not warrant that the hardware will work properly in all environments and
applications, and marks no warranty and representation, either implied or expressed, with respect to the
quality, performance, merchantability, or fitness for a particular purpose. Lantronix disclaims liability for
any inaccuracies or omissions that may have occurred. Information in this User Guide is subject to change
without notice and does not represent a commitment on the part of Lantronix. Lantronix assumes no
responsibility for any inaccuracies that may be contained in this User Guide. Lantronix makes no
commitment to update or keep current the information in this User Guide and reserves the right to make
improvements to this User Guide and /or to the products described in this User Guide, at any time without
notice.