Lantronix
SM24TBT2DPA and SM24TBT2DPB Web User Guide
2-5 Security
This section lets you configure the Switch Security settings. You can use the Port Security feature to
restrict input to an interface by limiting and identifying MAC addresses.
2-5.1 Switch
2-5.1.1 Users
This page provides an overview of the current users. Currently the only way to login as another user on
the web UI is to close and reopen the browser.
Web Interface
To configure Users in the web UI:
1. Click Configuration, Security, Switch, Users.
2. Click Add New User.
3. Specify the User Name, Password, and Privilege Level parameters.
4. Click Apply.
Figure 2-5.1.1: Users Configuration page
Parameter descriptions:
User Name:
The name identifying the user. This is also a link to Add/Edit User.
Password:
Type the password. The allowed string length is 0 – 255 characters, and the allowed content is
the ASCII characters from 32 to 126.
Password (again):
Type the password again. You must type the same password again in the field.
Privilege Level:
The privilege level of the user. The allowed range is 0 - 15. If the privilege level value is
15, it can access all groups, i.e. that is granted the fully control of the device. But other values need to
refer to each group privilege level. A User's privilege should be same or greater than the group privilege
level to have the access of that group. By default, most groups’ privilege level 5 has the read-only access
and privilege level 10 has the read-write access. And the system maintenance (software upload, factory
defaults and etc.) need user privilege level 15. Generally, privilege level 15 can be used for an
administrator account, privilege level 10 for a standard user account and privilege level 5 for a guest
account.