Lantronix SM24TBT2DPA Скачать руководство пользователя страница 308

Страница: 308 / 360

Lantronix

SM24TBT2DPA and SM24TBT2DPB Web User Guide

33738 Rev. H

https://www.lantronix.com/

Page 308 of 376

3-15.2.2 Group to VLAN

This page displays the configured Group Name to a VLAN for the switch.
To display the Group to VLAN mapping in the web UI:

1. Click Monitor, VCL, Group to VLAN.

2. Check “Auto-refresh”.

3. Click “Refresh” to refresh the port detailed statistics.

Figure 3-15.2.2: Group Name to VLAN mapping Table Status page

Parameter descriptions:
Group Name:

A valid Group Name is a string at the most 16 characters consisting of a combination of

alphabet characters (a-z or A-Z) and integers (0-9); no special characters are allowed. Whichever Group

name you try, a map to a VLAN must be present in the Protocol to Group mapping table and must not be

pre-used by any other existing mapping entry on this page.

VLAN ID:

Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges from 1-4095.

Port Members:

A row of check boxes for each port is displayed for each Group Name to VLAN ID

mapping. To include a port in a mapping, check the box. To remove or exclude the port from the mapping,

make sure the box is unchecked. By default, no ports are members, and all boxes are unchecked.

Buttons

Auto-refresh:

Check this box to refresh the page automatically every 3

seconds.

Refresh

: Click to refresh the page immediately.

Содержание SM24TBT2DPA









































































































































































































































































































































































Результаты поиска

Содержание SM24TBT2DPA

Отзывы:

Lantronix SM24TBT2DPA, Руководство пользователя для веб, Страница: 308 / 360

Результаты поиска

Содержание SM24TBT2DPA

Отзывы: