Lantronix SM24TBT2DPA Скачать руководство пользователя страница 235

Страница: 235 / 360

Lantronix

SM24TBT2DPA and SM24TBT2DPB Web User Guide

33738 Rev. H

https://www.lantronix.com/

Page 235 of 376

3-4.4 Detailed Statistics

This page provides statistics for DHCP snooping. Note that the normal forward per-port TX statistics are

not increased if the incoming DHCP packet is done by an L3 forwarding mechanism. Also, clearing the

statistics on a specific port may not take effect on global statistics since it gathers statistics from a

different layer.
To monitor DHCP detailed statistics in the web UI, click Monitor, DHCP, Detailed Statistics.

Figure 3-4.4: DHCP Detailed Statistics page

Parameter descriptions:
Rx and Tx Discover:

The number of discover (option 53 with value 1) packets received and transmitted.

Rx and Tx Offer:

The number of offer (option 53 with value 2) packets received and transmitted.

Rx and Tx Request:

The number of request (option 53 with value 3) packets received and transmitted.

Rx and Tx Decline:

The number of decline (option 53 with value 4) packets received and transmitted.

Rx and Tx ACK:

The number of ACK (option 53 with value 5) packets received and transmitted.

Rx and Tx NAK:

The number of NAK (option 53 with value 6) packets received and transmitted.

Rx and Tx Release:

The number of release (option 53 with value 7) packets received and transmitted.

Rx and Tx Inform:

The number of inform (option 53 with value 8) packets received and transmitted.

Rx and Tx Lease Query:

The number of lease query (option 53 with value 10) packets received and

transmitted.

Rx and Tx Lease Unassigned:

The number of lease unassigned (option 53 with value 11) packets

received and transmitted.

Содержание SM24TBT2DPA









































































































































































































































































































































































Результаты поиска

Содержание SM24TBT2DPA

Отзывы:

Lantronix SM24TBT2DPA, Руководство пользователя для веб, Страница: 235 / 360

Результаты поиска

Содержание SM24TBT2DPA

Отзывы: