Lantronix SM24TBT2DPA Скачать руководство пользователя страница 215

Страница: 215 / 360

Lantronix

SM24TBT2DPA and SM24TBT2DPB Web User Guide

33738 Rev. H

https://www.lantronix.com/

Page 215 of 376

3-1.4 Detailed Log

This page displays more detailed log information of the switch. To display detailed log information in the

web UI:

1. Click Monitor, System, and Detailed Log.
2. View the log information.

Figure 3- 1.4: Detailed System Log Information page

Parameter descriptions:
ID:

The ID of the system log entry.

Message:

The detailed message of the system log entry (the level, time, and message displayed).

Buttons

Refresh:

Updates the system log entries, starting from the

current

entry ID.

<< :

Updates the system log entries

to the first available entry ID.

< :

Updates the system log entry to the previously available entry ID.

> :

Updates the system log entry to the next available entry ID.

>> :

Updates the system log entry to the last available entry ID.

Messages

Info

messages

: e.g., topologyChange, Login passed for user 'admin', etc.

Warning messages

: Switch just made a warm boot, Link up on port 1, SFP module inserted on port 25,

Password of user 'admin' was change ... , Power A: Inserted, Power A: Good, Power A: Fan Good (8873

RPM), Power A: Temperature Normal (31 C), Power B: Removed, Power B: Fail, Power B: Fan Good (0

RPM), Power B: Temperature Normal (0 C), Bad password attempt for user '' through TELNET from

192.168.1.99 and authenticated by local method, User 'admin' logout through HTTP from 192.168.1.99,

etc.

Содержание SM24TBT2DPA









































































































































































































































































































































































Результаты поиска

Содержание SM24TBT2DPA

Отзывы:

Lantronix SM24TBT2DPA, Руководство пользователя для веб, Страница: 215 / 360

Результаты поиска

Содержание SM24TBT2DPA

Отзывы: