Lantronix SM24TBT2DPA Скачать руководство пользователя страница 198

Страница: 198 / 360

Lantronix

SM24TBT2DPA and SM24TBT2DPB Web User Guide

33738 Rev. H

https://www.lantronix.com/

Page 198 of 376

2-20 Mirroring

For debugging network problems or monitoring network traffic, the switch system can be configured to

mirror frames from multiple ports to a mirror port. In this context, mirroring a frame is the same as copying

the frame. Both incoming (source) and outgoing (destination) frames can be mirrored to the mirror port.
To configure Mirroring in the web UI:

1. Click Configuration, Mirroring.

2. Scroll to select Port to mirror on which port.

3. Scroll to disabled, enable, TX Only and RX only to set the Port mirror mode.

4. Click the Apply button to save the setting.

5. To cancel the settings click the Reset button to revert to previously saved values.

Figure 2-20: Mirror Configuration page

Parameter descriptions:

(before FW vB6.54.3476)

Port to mirror to:

Port to mirror also known as the mirror port. Frames from ports that have either source

(Rx) or destination (Tx) mirroring enabled are mirrored on this port. Disabled disables mirroring.

Mirror Port Configuration:

The following table is used for Rx and Tx enabling.

Port:

The logical port for the settings contained in the same row.

Mode:

Select mirror mode.

Rx only

Frames received on this port are mirrored on the mirror port. Frames transmitted are not

mirrored.

Tx only

Frames transmitted on this port are mirrored on the mirror port. Frames received are not

mirrored.

Disabled

: Neither frames transmitted nor frames received are mirrored.

Enabled

: Frames received and frames transmitted are mirrored on the mirror port.

Содержание SM24TBT2DPA









































































































































































































































































































































































Результаты поиска

Содержание SM24TBT2DPA

Отзывы:

Lantronix SM24TBT2DPA, Руководство пользователя для веб, Страница: 198 / 360

Результаты поиска

Содержание SM24TBT2DPA

Отзывы: