Lantronix SM24TBT2DPA Скачать руководство пользователя страница 16

Страница: 16 / 360

Lantronix

SM24TBT2DPA and SM24TBT2DPB Web User Guide

33738 Rev. H

https://www.lantronix.com/

Page 16 of 376

Chapter 2 - System Configuration

This chapter describes basic configuration tasks including the System Information and other switch

management (e.g., Power, IP, Time, Account, Syslog, NTP.)

2-1 System

You can identify the switch by configuring the contact information, name, and location.

2-1.1 Information
Switch system contact information is provided here. To configure System Information in the web UI:

1. Click Configuration, System, Information.

2. Enter System Contact, System Name, and System Location information as desired.

3. Click Apply. The switch system information is displayed.

Figure 2-1.1: System Inform

ation Configuration page

Parameter descriptions:
System

Contact

: The textual identification of the contact person for this managed node, together with

information on how to contact this person. The allowed string length is 0 – 128 characters.

System

Name

: An administratively assigned name for this managed node. By convention, the system

name may be the node's fully-qualified domain name. The allowed string length is 0 – 128 characters.

System

Location

: The physical location of this node (e.g., telephone closet, 3

floor). The allowed string

length is 0 – 128 characters.

Buttons
Apply

: Click to save changes.

Reset

: Click to undo any changes made locally and revert to previously saved values.

Содержание SM24TBT2DPA









































































































































































































































































































































































Результаты поиска

Содержание SM24TBT2DPA

Отзывы:

Lantronix SM24TBT2DPA, Руководство пользователя для веб, Страница: 16 / 360

Результаты поиска

Содержание SM24TBT2DPA

Отзывы: