Lantronix SM24TBT2DPA Скачать руководство пользователя страница 124

Страница: 124 / 360

Lantronix

SM24TBT2DPA and SM24TBT2DPB Web User Guide

33738 Rev. H

https://www.lantronix.com/

Page 124 of 376

2-9.2 Address Entry

This page provides address range settings used in IPMC profile. The address entry is used to specify the

address range that will be associated with IPMC Profile. You can create up to 128 address entries per

switch.
To configure IPMC Profile Address parameters in the web UI:

Parameter descriptions:
Delete:

Check to delete the entry. The designated entry will be deleted during the next save.

Entry Name:

The name used for indexing the address entry table. Each entry has the unique name which

is composed of at maximum 16 alphabetic and numeric characters. At least one alphabet must be present.

Start Address:

The starting IPv4/IPv6 Multicast Group Address that will be used as an address range.

End Address:

The ending IPv4/IPv6 Multicast Group Address that will be used as an address range.

Buttons

Add New Address (Range) Entry

– Click to add new address range. Specify the name and configure the

addresses. Click “Apply”

Apply

– Click to save changes.

Reset

– Click to undo any changes made locally and revert to previously saved values.

Refresh

– Refreshes the displayed table starting from the input fields.

– Updates the table starting from the first entry in the IPMC Profile Address Configuration.

– Updates the table, starting with the entry after the last entry currently displayed.

Содержание SM24TBT2DPA









































































































































































































































































































































































Результаты поиска

Содержание SM24TBT2DPA

Отзывы:

Lantronix SM24TBT2DPA, Руководство пользователя для веб, Страница: 124 / 360

Результаты поиска

Содержание SM24TBT2DPA

Отзывы: